Serving Glendale, Burbank and Greater Los Angeles
Free Quotes (424) 653-0453
Camberos Masonry Brick · Block · Stone · Concrete
Driveway Repair in Los Angeles, CA
Our Services

Driveway Repair in Los Angeles, CA

Driveway Repair · Los Angeles, CA

Concrete Driveway Repair Across Los Angeles

Driveway repair in Los Angeles keeps the slab you have and fixes the part that failed. Our concrete driveway repair covers the drive on your lot and the sloped apron at the curb. Stable cracks get cleaned out and sealed. A broken, sunken or root-lifted panel gets saw cut out, and a new one is poured on a compacted base. For a cracked patio or entry slab, see our concrete repair for patios and entry slabs.

A driveway repair call usually starts with a crack that keeps widening or a raised edge someone tripped on. Others start when a street tree pushes up the apron. On the visit, we check whether both sides of each crack sit flush. We look for panels that rock under a car and low spots that hold water. We also note which panels sit in the city's right of way. The free written quote lists each crack to seal and each panel to replace.

What We Handle

  • Stable driveway cracks cleaned out and sealed
  • Root-lifted panels saw cut at the joints
  • Sunken sections that hold water cut out
  • Roots and soft soil dug out, base compacted
  • Crumbling edges and broken corners poured again
  • Isolation joint where the drive meets the garage
  • Apron repair under a City of LA A-Permit
  • Written quote naming each crack and panel
  • Free quotes given on site

Free Driveway Repair Quote

Tell us about your project - we’ll get right back to you.

Why Do Los Angeles Driveways Crack and Lift?

Concrete shrinks as it dries. The National Ready Mixed Concrete Association (NRMCA) notes that as a slab dries, new cracks may form and old ones may widen. Its answer is the joint, which it calls a pre-planned crack. NRMCA spaces joints at 24 to 36 times the slab thickness, or about 10 feet on a 4 inch slab. A drive poured in long, unjointed panels picks its own crack lines.

NRMCA says most cracks come from design and construction mistakes, naming missing joints and improper subgrade preparation. City of Los Angeles plan check treats local soil as expansive unless a soils report says otherwise. Expansive clay swells when wet and shrinks as it dries, and a slab on soft base moves with it. Street tree roots in the parkway can push the apron up from below.

Which Driveway Cracks Need Repair, and Which Are Only Cosmetic?

NRMCA says most early, random cracks, although unsightly, rarely affect the structural integrity or service life of concrete. A hairline crack whose sides sit flush gets cleaned out and sealed, which keeps water and grit out of the base. The sealed line stays visible as a thin seam. A September 2026 Google review mentions our driveway crack patching, done with a new brick-inlay front walk.

A crack needs real repair when its two sides no longer line up. A raised edge catches toes, and a sunken panel holds water after rain. A panel that rocks under a car has lost its support. HomeGuide notes that crumbling usually starts at the pavement edges or near the apron. A drive laid in pavers is a different build; see driveways laid in concrete pavers.

How We Repair a Cracked Concrete Driveway

Every panel that moved gets saw cut at its joints and comes out whole. The city's spec for sidewalk and driveway concrete works the same way. A saw cut that would fall within 30 inches of a joint or edge moves to that joint or edge. Roots, broken concrete and soft soil come out, and the base is compacted. The new panel is formed and poured like the new concrete slabs and pads we build.

NRMCA calls for an isolation joint where a drive meets the garage slab, a sidewalk or stairs. It lets each slab move on its own. Our new panels get one there. One customer's review describes the same method at a front entrance. Old tree roots and the cracked slab came out, and new concrete was poured in two days. For broken steps beside the drive, see new walks and steps to the front door.

Driveway Apron Repair, the Parkway and Street Tree Roots

The apron is the sloped concrete where the driveway meets the curb. In the City of Los Angeles, it sits in the public right of way with the parkway and sidewalk. LAMC 62.105 requires a Bureau of Engineering permit, the A-Permit, for work there. The city sets no rule on who applies. The permit is handled as part of the job, and we file the paperwork for you.

Street tree roots in the parkway can lift an apron and the sidewalk beside it. Repairing sidewalk damage from tree roots takes a no-fee A-Permit, once the city has a picture of the damage. Trimming those roots takes a Street Tree permit from the Bureau of Street Services, requested after the A-Permit. A rebuilt apron follows City Standard Plan S-440-4, with at least 4 inches of concrete in R-1 and R-2 zones. Glendale, Burbank and Pasadena run their own permits.

Should You Repair the Driveway or Replace It?

Repair makes sense while the damage sits in a few panels and the base under the rest is sound. Angi's 2026 national figures put the average concrete driveway repair at $1,872, against $6,400 for an average full replacement. Two sealed cracks and one new panel leave most of the slab in place. For line items, see LA concrete repair prices by job type.

Replacement makes sense when the base has failed under most of the slab. Cracks cross nearly every panel, and each patch only moves the problem to the next one. At that point the whole slab comes out and a new one goes in on rebuilt base. That is replacing the whole driveway, and the quote prices it as its own job.

A full replacement is also the time to change the surface. Our past driveway work includes turf-strip concrete pads and a paver driveway to a garage. A failed slab can also come back as a herringbone clay brick drive. Whichever case your driveway is in, the free written quote names it before work starts.

New concrete driveway section we poured past the old cracked slab, edged in river rock Cracked concrete driveway panels in front of a garage door

Ready to get started?

Free, no-obligation estimates across Glendale, Burbank and Greater Los Angeles.

(424) 653-0453
How We Work

How a Job With Camberos Runs

From the first look at the site to the final walk-through, here is exactly how it goes.

1

See the Site

We look at the project where it lives: the grade, the access, what is being held back or built on, and what you want the finished space to look like.

2

Straight Quote

You get a written quote with a real timeline. It spells out materials, finishes, demolition and haul-off, and flags permit or engineering questions before anything is built.

3

We Build It

Proper base and footings, clean courses, real drainage behind every wall. The details you cannot see are the reason the work lasts, and we treat them that way.

4

Final Walk-Through

We walk the finished work together - joints, finishes, cleanup, the whole job. Done means you have looked at every part of it and said so.

FAQ

Driveway Repair Questions, Answered

Common questions about driveway repair across Glendale, Burbank and Greater Los Angeles. Don't see yours? Give us a call - we're happy to help.

Call (424) 653-0453

How much does driveway repair cost in Los Angeles?
Angi's 2026 national guide puts concrete driveway repair at $828 to $2,925, with a $1,872 average across 22,652 projects. Replacing a damaged slab section runs $6 to $14 per square foot there, haul-off included. HomeGuide notes minimum service fees of $100 to $250 for crack repair. Our written quote is free.
Can a cracked concrete driveway be repaired, or does it need to be replaced?
It can be repaired when the damage sits in some cracks and a few panels. Stable cracks get sealed, and lifted or sunken panels get cut out and poured new. Replace it once the base has failed under most of the slab and cracks cross nearly every panel.
Do I need a permit to repair my driveway in Los Angeles?
Usually not on your own lot in the City of Los Angeles. Under LAMC 91.106.2, a driveway no more than 30 inches above grade, and not over a basement or story below, needs no building permit. The apron, parkway and sidewalk are public right of way and need a Bureau of Engineering A-Permit. Glendale, Burbank and Pasadena run their own permits.
What can be done about a driveway apron lifted by street tree roots?
In the City of Los Angeles, a lifted apron is cut out and rebuilt under a Bureau of Engineering A-Permit. The new apron follows City Standard Plan S-440-4. Trimming the street tree's roots needs a Street Tree permit from the Bureau of Street Services, requested after the A-Permit. Sidewalk damage from those roots gets a no-fee A-Permit once the city has photos.
Will a sealed driveway crack come back?
It can, if the slab is still moving. Sealant fills the gap; it does not stop roots or clay from shifting the slab. NRMCA notes that drying concrete keeps shrinking, so new cracks may form and old ones may widen. A crack with a raised or sunken side needs a new panel.
Can new concrete be poured over my old driveway?
Only over a slab that is still sound. A thin topping sticks to the slab below, so a moving slab sends its cracks through. Federal Highway Administration (FHWA) guidance puts these overlays on pavement in good structural condition, with joints matched to the old ones. On a cracked, moving driveway, we replace the failed panels instead.
More From Camberos Masonry

Explore Our Other Services

Brick Masonry in Los Angeles, CA

Brick Masonry

Brick walls, steps, walkways, planters and full brick driveways - plus brick veneer over existing walls. Classic material, clean coursing.

Learn More
Stone Masonry in Los Angeles, CA

Stone Masonry

Natural stone walls, river rock work, flagstone patios and paths, and stone veneer on walls, columns and outdoor kitchens.

Learn More
Retaining Walls in Los Angeles, CA

Retaining Walls

Engineered block and concrete retaining walls with real drainage - stucco, stone or brick finished - plus failing walls rebuilt right.

Learn More
Block Walls in Los Angeles, CA

Block Walls

Property line walls, privacy walls, courtyard walls and gated front-yard enclosures - reinforced block, finished in stucco, stone or left clean.

Learn More
Concrete in Los Angeles, CA

Concrete

Driveways, patios, pool decks, steps, walkways and slabs - formed and poured on compacted base, finished the way you pick.

Learn More
Pavers in Los Angeles, CA

Pavers

Interlocking paver driveways, patios, walkways and pool decks - real base prep, tight patterns, edges that hold.

Learn More

What Homeowners Are Saying

Recent 5-star reviews from Yelp and HomeAdvisor

From Our Blog

Driveway Repair Guides

Why Choose Camberos

Why LA Homeowners Call Camberos Masonry

Real Masonry, By Hand

Brick, block, stone and concrete are our whole trade - not a sideline. Footings, coursing, drainage and finish details done the traditional way, because that is why masonry lasts.

Built for LA Ground

Hillside walls with real drainage, slabs built for expansive soil, finishes that suit Spanish, Craftsman and modern houses. This is Los Angeles work by people who know Los Angeles lots.

Straight Written Quotes

We look at the site, flag permits and engineering honestly, and put the price and timeline in writing. No phone guesses, no surprise change orders for things we should have seen.

One Contractor, Whole Project

Walls, flatwork, veneer, fire features and tile from one contractor - so materials match, schedules hold, and the finished yard reads as one design instead of four handoffs.

Start Your Project

Get In Touch With Camberos Masonry

A wall that worries you, a driveway past its best, or a backyard ready to become the good part of the house? Call or send the form and we will look at the site with you and hand you a straight written quote.

Get a Free Quote

Tell us about your project - we’ll get right back to you.

Call (424) 653-0453